Roktavor R3 is a round Energy Layer designed for Stamina. Consisting of a small inner layer made of clear plastic and four wings, two of which are small and made of clear plastic and two of which are large are made of colored plastic. The large wings are molded to create the visage of heads to match the anime's rendition of the Layer's beast, a winged demon. The small clear wings are dubbed the "Stamina Wings" and make up the gimmick of this Layer.

In theory, the edges of the wings would extend from their hinges and increase a Beyblade's stamina by increasing the Layer's Outward Weight Distribution, however in practice the size of the wings are simply too small to cause any noticeable weight shift and thus serve no real purpose.

The compact placement of the wings creates a very round design where any protrusions and gaps from and between the wings are too shallow to create high recoil. The large size of the wings imply high Outward Weight Distribution and Stamina potential but in actuality, Roktavor R3's Stamina is only average. The Takara Tomy release, Blaze Ragnaruk, features four teeth of tall height giving this Layer high Burst resistance.

New CHO-Z triple booster set. This set contains of 3 powerful beyblade.

- Hazard Kerbeus 7 Atomic (Defense Type Beyblade)

- Z Achilles 3Dagger Destroy (Attack Type Beyblade)

- Wolborg 8 Bearing (Stamina Type Beyblade)

Hazard Kerbeus is a Defense Type Energy Layer with two large blades and features three dog heads down the center, meant to represent the Layer's namesake, the mythological three headed hound Cerberus. As part of the Cho-Z Layer System, Hazard Kerbeus features metal in its design; in this case, the two blades are lined with metal in the shape of chains. The inclusion of metal makes the Layer heavier than most SwitchStrike/God Layers.

Z Achilles A4 is a Balance Type Energy Layer that features four large blades, creating a high recoil, rectangular shape. As part of the Cho-Z Layer System, Z Achilles features metal in its design; in this case, concentrated on the wings.

Wolborg is an adaptation of the Reverse Wolf Attack Ring and Wolborg Bit Chip from the Original Plastic Generation meant for the Burst System. As such it features an overall square/diamond shape with four wolf heads that act as the main contact points and an image of the Bit Beast Wolborg in the center. The only differences between the Energy Layer and the original Attack Ring are that the wolf heads are more rounded, lack the gap in the blades and are more compact making the Layer somewhat smaller overall and the "Bit Chip" is non-removable.

 Beyblade Burst Cho-Z B-124 Long Bey Launcher Set support left spin Beyblade only and provide super sharp shoot!

This set contains 1 x Geist Fafnir enhanced part. 

Content:

- Long BeyLauncher L

- Carabiner Grip

- Weight Damper

- Proof

The new Musou Bey Stadium is now available in the Chou-Z series and inherited the main feature - "auto spinning" from Mugen Infinite Bey Stadium DX. This new stadium has enhanced the auto spinning feature with two rotating tables on the same stadium and this set included two ultimate combinable Beyblades - Apollo and Artemis.
Content:- Musou Beystadium- Right Spin Artemis Infinite- Left Spin Apollos Infinite-L- Tools (fastener x2, electric unit, non-rotating dish x2, rotating plate x2)

Turbo Achilles  is a Balance Type Energy Layer, the center features a shield and an armored face facing forward, unlike its predecessor where the face was seen from a side profile, meant to represent the Layer's namesake; the Greek hero, Achilles. The perimeter is made up of four large blades as the primary points of contact, two of which are molded in the shape of swords, granting the Layer high Knock-Out and Burst Attack potential. As part of the Cho-Z Layer System, Cho-Z Achilles features metal in its design; in this case, concentrated on the sword blades. Cho-Z Achilles also features a gimmick; the Layer features an anti-Bursting mechanism called the "Cho-Z Awakening System".

WBBA Exclusive Item - Beyblade Burst BBG-20 Event EX Booster Cho-Z Achilles 00 DM Gold Ver

Turbo Achilles  is a Balance Type Energy Layer, the center features a shield and an armored face facing forward, unlike its predecessor where the face was seen from a side profile, meant to represent the Layer's namesake; the Greek hero, Achilles. The perimeter is made up of four large blades as the primary points of contact, two of which are molded in the shape of swords, granting the Layer high Knock-Out and Burst Attack potential. As part of the Cho-Z Layer System, Cho-Z Achilles features metal in its design; in this case, concentrated on the sword blades. Cho-Z Achilles also features a gimmick; the Layer features an anti-Bursting mechanism called the "Cho-Z Awakening System".

Dead Phoenix.0.At is a powerful Defense Type Beyblade released as part of the Burst System as well as the Cho-Z Layer System.

This is the last Beyblade that released in Cho-Z series.

Kindly note that the item is brand new with factory sealed, but the packaging is not in mint condition. Due to the item kept in warehouse for quite some times. 

This item is not compatible with Beyblade Burst Launcher.

Flame Libra T125ES is a Stamina-Type Beyblade released as part of the Hybrid Wheel System and its owner is Yu Tendo. It was released in Japan in September 2009. 

Kindly note that the item is brand new with factory sealed, but the packaging is not in mint condition. Due to the item kept in warehouse for quite some times. 

This item is not compatible with Beyblade Burst Launcher.

Rock Leone 145WB is a Defense-Type Beyblade that appears in the anime and manga series, Beyblade: Metal Fusion. Its owner is Kyoya Tategami and its evolution is Fang Leone 130W²D. Its Legend Version is Counter Leone 145D.

Kindly note that the item is brand new with factory sealed, but the packaging is not in mint condition. Due to the item kept in warehouse for quite some times. 

This item is not compatible with Beyblade Burst series

The String Launcher is an alternative to the Ripcord Launcher used to launch Right-Spin Beyblades from the Beyblade: Metal Fusion, Beyblade: Metal Masters and Beyblade: Metal Fury toy lines. They are notoriously known for their incredible power that launches these Beyblades - thanks to their implementation of a string, as its name would suggest.

Kindly note that the item is brand new with factory sealed, but the packaging is not in mint condition. Due to the item kept in warehouse for quite some times. 

This item is not compatible with Beyblade Burst Launcher.

The Beyblade Super Deck Set is a Beyblade Deck Set released by Takara Tomy. It includes three Beyblades which were considered top-tier at the time along with a Metal Face Tool Assist. It was released on November 20, 2010 in Japan with the product number, BB-96.

Contents:

- MF-H Pegasis 85RF

- Libra 100D

- MF-F Burn Cancer 90WD

- Metal Face Tool

Zero-G Random Booster Vol. 1 Thief Phoenic is the name of the first Random Booster under the toyline, Beyblade: Shogun Steel by Takara Tomy. Its product number is BBG-09. You can get 1 of 8 Zero-G Beyblades from it.

This booster pack contains only 1 Beyblade out of the 8 models. 

Contents

- Thief Phoenic E230GCF (Super Rare)

- Thief Saramanda 230WB (Rare)

- Samurai Saramanda E230ES (Rare)

- Pirates Ifraid T125GCF (Rare)

- Shinobi Ifraid 230WD

- Pirates Saramanda T125WB

- Shinobi Orojya 145ES

- Samurai Orojya 145WD

Kindly note that the item is brand new with factory sealed, but the packaging is not in mint condition. Due to the item kept in warehouse for quite some times. 

This item is not compatible with Beyblade Burst Launcher.

Pirate Orochi 145D is a five-piece top with a high-profile Spin Track part and a Defense Performance Tip piece that can withstand attacks. This top's performance type is stamina - built to spin a long time and outlast an opponent.

- The limited edition Achilles (White Knight Version)

- Included both limited version of  00 disc and DM driver. 

- The launcher is sold separately.

- Featuring the exact same gimmicks as the original version. 

- An enhance driver set specially for Phanton Orion Beyblade.

- This item is compatible with Beyblade Metal Fusion Series only. 

- Include 3 different type of drivers (Atk + Def)

- The Phanton Orion Beyblade is sold separately.

- An enhance driver set specially for Big Bang Pegasis Beyblade.

- This item is compatible with Beyblade Metal Fusion Series only. 

- Include 3 different type of drivers (Atk + Def)

- The Big Bang Pegasis Beyblade is sold separately.

Event Exclusive  Item - Beyblade Burst BBG-17 Event EX Bey Laucher LR Gold Ver.

A bey launcher that support both left and right spin. A clever device under the cord is used to change the mode easily to either a left or right spinning launcher. This makes it compatible with every Beyblades.

Event Exclusive  Item - Beyblade Burst BBG-15 Event EX Booster Revive Phoenix 10 FR Silver

Phoenix P4 is a Defense Type Energy Layer.  As a part of the Cho-Z Layer System, Revive Phoenix features metal in its design; in this case, lining the tips of the wings and surrounding the center. The inclusion of metal makes Revive Phoenix heavier than most SwitchStrike/God Layers. Phoenix P4 also features a gimmick; the Layer can Burst twice.

To Burst twice, the four bladed outer perimeter making up the wings, known as the Revive Armour, is attached to the rest of the Layer by a mechanism different to what connects a Layer to a Performance Tip and will only release once a Revive Phoenix Combination loses a click. Since the Revive Armour has a weaker lock than Revive Phoenix's own medium length teeth, it parries impacts with the opponent akin to Tornado Wyvern's free-spinning Layer. While the loss of the Revive Armour makes the Layer much lighter, the smoother perimeter this action creates reduces recoil to compensate.  

Like many other Cho-Z Layers, Revive Phoenix is unbalanced which increases Burst risk and drains Stamina. However, these issues can be solved with the use of a Level Chip that fits underneath the Layer.

Event Exclusive  Item - Beyblade Burst BBG-16 Event EX Rubber Launcher Grip Phoenix Ver

A rubber launcher grip that used to attach to the bottom of the launcher. An essential accessory for every Beyblade player, the grip is amazing to hold and it can help to stabilize the launcher to make better shoot!

WBBA Store Exclusive Item - Beyblade Burst BBG-22 WBBA Store Exclusive Booster Cho-Z Valkyrie 1R RB

Cho-Z Valkyrie.1R.RB  is an Attack Type Energy Layer, the center features a feathered, armored face facing forward, akin to its predecessor Winning Valkyrie, meant to represent the Layer's namesake; Odin's handmaidens of Norse mythology, albeit changed to match the anime's rendition; an armored knight. Like its predecessors, Cho-Z Valkyrie features three large wings as the primary points of contact, granting the Layer high Knock-Out and Burst Attack potential. As part of the Cho-Z Layer System, Cho-Z Valkyrie features metal in its design; in this case, concentrated behind each wing and in the center. However, Cho-Z Valkyriefeatures less metal than most other Cho-Z Layers and most of its weight comes from its size. Cho-Z Valkyrie also features a gimmick; the Layer features an anti-Bursting mechanism called the "Cho-Z Awakening System".

At high spin velocity, the centrifugal force activates a bistable mechanism, revealing red sub-wings called the "Cho-Z Wings" and in turn extending a Burst-stopping tab located in the left groove meant to fit the prongs of the Disc. This Burst-stopper then obstructs the Disc from moving during impact, preventing the loss of the last click and preventing the Cho-Z Valkyrie combination from Bursting. Due to the bistable mechanism, the wings and tab do not retract when spin speeds are low and must be manually pushed in after every match, the mechanism also allows the gimmick to work as intended.

Because of Cho-Z Valkyrie's triangular design, only the upper-left wing will move the tab with the other two being purely aesthetic. However, due to the bistable mechanism, Cho-Z Valkyrie requires rather extreme spin speeds for the gimmick to activate which may be difficult for younger bladers.

The Layer's size and the inclusion of metal makes Cho-Z Valkyrie heavier than most SwitchStrike/God Layers and improves Attack Potential by increasing the weight of the Layer, granting higher inertia that increases both KO and Burst Attack as well as increasing the Layer's Burst resistance as the high inertia resists teeth skipping, a property that compliments the tall teeth of the Takara Tomy release of Cho-Z Valkyrie. Due to these factors and the shape of the blades, Cho-Z Valkyrie performs well in Attack Combinations. However, the wings of Cho-Z Valkyrie show greater Attack potential when the "Cho-Z Wings" are not active as they cover up a more acute point of contact and when the "Cho-Z Wings" are active, the new point of contact is much more obtuse, reducing recoil. As such, Cho-Z Valkyrie almost requires the use of the three pointed Zenith Disc to concentrate weight at the points of contact to be effective with the gimmick activated.

Unlike previous Cho-Z Layers and like other Layers with the "Cho-Z" and "Turbo" prefixes, Cho-Z Valkyrie and Turbo Valtryek V3 are both incompatible with a Level Chip.

Event Exclusive Item -  Beyblade Burst BBG-23 Event EX Long Bey Launcher R (Gold Ver)

An essential accessory to launch the Beyblade.  This launcher only supports right spin Beyblade. 

Compatible with Beyblade Burst products only.

In commemoration of the 20th anniversary of the "burst shoot Beyblade", nine kinds of Beyblade appear as Beyblade burst version! Special specification that bay was colored! Draciel F, which reproduces the color of the time as a new bay, is finally back! In addition, the inside of the commemorative box is also accompanied by a new illustrations drawn by Takao Aoki!

- Included 9 different kind of Beyblade

- Launcher is sold separately.

- Molded into Beyblade Burst specification

- Deluxe packaging

Kindly note that the packaging of the item is not in mint condition, due to it has been kept in the warehouse for quite some times.  However, the item inside is still brand new with factory sealed.

This item is not compatible with Beyblade Burst Launcher.

Each pack contains only 1 bey out of the 8 models. One complete bey is given in each booster pack. 

There is 1/8 chance to get each beyblade.  All Tracks and Bottoms found in this booster are the clear versions.

This product contains of 1x complete beyblade, 1x proto launcher and 2 x layers.

Ace Dragon Sting Charge Zan is an Attack Type Beyblade released by Takara Tomy as part of the Burst System as well as the Gatinko Layer System.  Despite being an Attack Type, Ace Dragon sports three modes in a similar manner to a Balance Type, like Z Achilles 11 Xtend+, but alters its mode through customizing its Layer Base (Ace Layer White (Attack), Grand Layer Red (Stamina), and Rock Layer Black (Defense)).

Slash Valkyrie Blitz Power Retsu is an Attack Type Beyblade. It is the evolution of Cho-Z Valkyrie Zenith Evolution. Slash Valkyrie is based on the word "slash", a striking motion with a blade, and "Valkyrie", a female Norse warrior that ride winged horses to combat.

Bushin Ashura Hurricane Keep Ten is a Defense Type Beyblade released by Takara Tomy as part of the Burst System as well as the Gatinko Layer System. Feature rubber at the driver and ultimate defend gimmicks with the 12 blades spinning continuous to surround itself.  The 12 baldes on the layer are also working as a good weapon to hit the opponent. 

This awesome set contains two original color Beyblades, 2 x special color layers, 2 x special color proto launchers, and a white color stadium too! Just open up the box and start battling right away! A good choice for beginner to start with! Includes Ace Dragon Sting Charge Zan (recolor), Slash Valkyrie Blitz Power Retsu (recolor) and Burst BeyStadium Standard Type (White).

An essential accessory to launch the Beyblade.  This launcher only supports right spin Beyblade.  

- Compatible with Beyblade Burst products only.

- Long string type GT launcher !