Action Figure

Takara Tomy Bottleman BOT-43 Blend Combine Royal Gryphon DX

- Bottleman equipped with a [drink loss system] whose performance changes with customization!
- The long-barreled, ultra-precise [R Glen-O DX] and the long-magazine [L Milkaiser DX], which can fire 5 consecutive shots, are combined!
- The combined [Royal Griffon DX] is a Gemini multi-type bottleman that has more launch ports and can fire 3 shots at the same time!

- Product contents: Core bottle (with cap) (2), star beast armor (1), bullet cap (6), long magazine (1), long barrel (1), sticker (1), correct play instructions (1)

• Figuarts ZERO [EXTRA BATTLE] SUPER SAIYAN 3 SON GOKU -Dragon fist explosion-

- Kanada's motorcycle is back from the [Revival] world-famous animation movie [AKIRA] for the first time in 11 years.

- Die-casting is used for the main part of the frame to pursue the reality that comes from the feeling of weight. The front suspension, which is plated to enhance the texture, can be expanded and contracted like a real motorcycle. Equipped with a voice gimmick that makes a running sound when the accelerator pedal is pressed and a squeal sound when the brake pedal is pressed. You can also enjoy higher quality and clearer sound by connecting to an external speaker.
* This product is equivalent to the one released in 2010.

- Front and rear wheels, front lights, blinkers.
- The center console panel and tail lamp also emit light.
- Exterior parts can be attached and detached. Die-cast is used for the main part of the frame.
- Pursue the reality of the actual vehicle with overwhelming texture and weight.
- The total length is about 500mm, 1/6 scale. Equipped with a voice gimmick that makes a running sound when the accelerator pedal is pressed and a squeal sound when the brake pedal is pressed.
- The front light can be opened and closed.
- The front suspension is movable and the front part expands and contracts up and down.
- The center console panel is also reproduced.
- The blinker part that doubles as a side mirror is also removable.
- You can enjoy higher quality and clearer sound quality by connecting to an external speaker.

[set content]
* Kaneda\'s motorcycle body
* Front cowl
* Light cover
* Front wheel cover (right)
* Front wheel cover (left)
* Side cover (right)
*  Side cover (left)
*  Rear wheel cover (right)
*  Rear wheel cover (left)
*  Rear wheel frame cover
*  Tail cover
*  Side undercover (right)
*  Side undercover (left)
*  Stand auxiliary parts
*  AAA batteries (AAA) x 3 (sold separately)

-Bottleman equipped with [Drink Loss System] whose performance changes with customization!
-Equipped with a power core bottle that can be squeezed!
-A power type bottleman of the phoenix seat where you can shoot powerful power shots with a slamming arm and wing parts!

-Product details:

- Core bottle with cap x1

- Star Beast Armor x1

- Bullet cap x1

- Sticker x1

- Correct play instructions x1

• Figuarts Zero chouette is proud to announce the arrival of Super Sailor Moon, from \"Sailor Moon Eternal\"
• Seated on a beautiful moon-shaped stand, accentuated by translucent silver crystals and fine detail, bring you right into her gorgeous world
• Stands approximately 7.5\" tall
• [Set Contents] Main Body(with Stand)
• Only product with affixed official Bluefin label has been thoroughly tested for safety and meets all North American consumer product safety regulations and entitles the purchaser to product support assistance

-Bottleman equipped with [Drink Loss System] whose performance changes with customization!
-Equipped with a speed core bottle to which a magazine can be attached!
?Aquarius speed type bottleman who can shoot 3 times in a short magazine and can easily aim at targets in tall places!

-Product details:

Core bottle with cap x1

- Star Beast Armor x1

- Bullet Cap x1

Sticker x1

Correct Play Instructions x1

-Bottleman equipped with [Drink Loss System] whose performance changes with customization!
-Equipped with a control core bottle to which a barrel can be attached!
-A control-type bottleman in Canes Venatici, where you can shoot precise control shots with a short barrel and easily aim at a target that is short and close to the ground!

- Product details:

- Core bottle with cap x1

- Star Beast Armor x1

- Bullet Cap x1

- Sticker x1

- Correct Play Instructions x1

- Bottleman equipped with [Drink Loss System] whose performance changes with customization!
- Phoenix is back as a bottleman to commemorate the 25th anniversary of the birth of Super B-Daman's main character [Fighting Phoenix]!
- Equipped with a power core bottle that can be squeezed!
- A power type bottleman that can shoot powerful power shots with a slamming arm and wing parts!

- Product details:

- Core bottle with cap x1

- Star Beast Armor x1

- Bullet cap x1

- Sticker x1

- Correct play instructions x1

- With new equipment that can also be used for [METAL BUILD Evangelion Unit 1] and [METAL BUILD Evangelion Unit 2], the long-awaited [METAL BUILD Evangelion Unit 0] finally unveils.

- The long-awaited No. 0 machine has appeared in the METAL BUILD Evangelion series, a giant with steel muscles. In addition to the [portable battery] and [recoilless rifle] newly set by designer Ikuto Yamashita, [replacement shoulder parts] that can reproduce the state with the shoulder pylon removed are for 3 units of 0th machine / 1st machine / 2nd machine. Included. The new development of METAL BUILD Evangelion, which will be reborn into a new form, has started.

- METAL BUILD [Evangelion Unit 0] is finally here in the Evangelion series.
- No. 0 / No. 0 (revised) can be replaced by replacing the shoulder parts.
- Progressive knives can be stored in the scabbard.
- Reproduce the new design of Unit 0 created by Mr. Ikuto Yamashita with precise coloring technique.
- Comes with two recoilless rifles on the left and right.
- METAL BUILD Original armed battle visor is included.
- Comes with a portable battery. Battery packs can be joined to various parts of the body.
- A pallet rifle is included.
- Comes with replacement shoulder parts that can be attached to the separately sold [METAL BUILD Evangelion Unit 1 / Unit 2]. You can enjoy an unprecedented novel silhouette.
- METAL BUILD Evangelion series restarts with unprecedented play value!

[set content]
* Main body
* Replacement wrist left and right 4 types each
* Palette rifle
* Magazine for pallet rifle
* Thigh pylon
* Progressive knife
* Progressive knife sheath
* Battery for carrying left and right x 2
* Battery holder for carrying
* Battery joint set
* Recoilless rifle left and right
* Left and right shoulder parts for reproducing Unit 0
* Battle visor
* A set of joints
* A set of umbilical cables
* A set of dedicated pedestals
* Support
* Replacement shoulder parts for the first machine left and right
* Replacement shoulder parts for Unit 2 left and right

Bring home one of the game’s most popular pets, in the form of an all- new toy bundle! This exclusive, reusable, 9-inch, Dragon container opens to reveal 8 great items inside! The incredible, instant collection includes: 2 DLC codes, 2 Mystery Eggs, a collector poster, mystery sticker, exclusive plush, and an exclusive mystery egg!

From the anime film Dragon Ball Z: Broly - Second Coming, is the Ichiban Kuji Super Saiyan Gohan figure. Poised to attack, he's ready to add super levels of power to your DBZ collection.

The Goku/Vegeta fusion has joined Bandai's Ichibansho line of collectible figures! Gogeta, in his Super Saiyan God Super Saiyan form, leaps into battle ready to throw a Saiyan-stopping punch.

Discover your new pet, with the Mystery Pet 4-Pack from the hit game series, Pet Simulator!

Each egg will reveal 1 of 20, Series 2 pets!

All packs include a valuable DLC code, a stand, and accessories to make your new pet extra special.

Build your pet collection today.

You never know when you’ll find a rare Rainbow, Golden, or Dark Matter pet!

- [Charizard] appears in Moncolle!
-Moncolle is a series of high-quality figures that perfectly reproduce the appearance of Pokemon.
-From the top of the head to the back, sides, and even the soles of the feet, it is faithfully reproduced, so if you pick it up, you may notice a new secret of [Charizard]!
- The size is the MS series (about 3-4cm).

- [Latios] appears in Moncolle!
-Moncolle is a series of high-quality figures that perfectly reproduce the appearance of Pokemon.
- From the top of the head to the back, sides, and even the soles of the feet, it is faithfully reproduced, so if you pick it up, you may discover a new secret of [Latios]!
- The size is the MS series (about 3-4cm).

- [Kairyu] appears in Moncolle!
-Moncolle is a series of high-quality figures that perfectly reproduce the appearance of Pokemon.
-From the top of the head to the back, sides, and even the soles of the feet, it is faithfully reproduced, so if you pick it up, you may discover a new secret of [Kairyu]!
- The size is the MS series (about 3-4 cm).

This is a palm-sized collectible die-cast figure.
The hat is removable, and the arms are articulated, allowing for various poses. It
comes with a miniature package featuring an image from the series, so you can display it in the miniature package as well.

- Product contents: Jessie figure (1), miniature package (1)

This is a palm-sized collectible die-cast figure.
The handle parts are movable, allowing for posing.
It comes with a miniature package featuring an image from the series, so you can display it in the miniature package as well. 

- Product contents: Smarty Pants figure (1), stand (1), miniature packaging (1)

This is a palm-sized collectible die-cast figure. The
neck joint is movable, allowing for various poses.
It comes with a miniature package featuring an image from the series, so you can display it in its miniature packaging as well.

- Product contents: Bullseye figure (1), miniature package (1)

This is a palm-sized collectible die-cast figure.
The arms are articulated, allowing for various poses.
It comes with a miniature package featuring an image from the series, so you can display it in its original packaging.

- Product contents: Alien figure (1), miniature package (1)

This is a collectible die-cast figure set featuring the "Pixar Lamp," a character from Pixar short films and opening sequences, and the logo from the movie "Toy Story."

Shiny metallic color! The Pixar lamp has a movable lampshade that allows it to be posed.

- Product contents: Pixar lamp figure (1), Toy Story logo figure (1)