Disclaimer:  The packaging condition may vary individually.  Kindly please contact us to confirm the packaging condition before placing order, thank you.  

Yuki Midorikawa, Hakusensha / [Natsume Yujincho] Production Committee

Brand: Tomica 

Manufacturer: Takara Tomy

Series: Dream Tomica

Release Date: Mid May, 2022

Material: Diecast

Item Size: 10 x 6 x 6 cm 

Weight : 70g

Disclaimer:  The packaging condition may vary individually.  Kindly please contact us to confirm the packaging condition before placing order, thank you.  

Yuki Midorikawa, Hakusensha / [Natsume Yujincho] Production Committee

Brand: Tomica 

Manufacturer: Takara Tomy

Series: Dream Tomica

Release Date: Mid May, 2022

Material: Diecast

Item Size: 10 x 6 x 6 cm 

Weight : 70g

- Pikachu with golden shiny appears in Moncolle!
- A set of 2 types, male and female!

- Moncolle is a series of high quality figures that completely reproduce the appearance of Pokemon.
- Faithfully reproduces from the top of the head to the back, sides, and soles of the feet.
- It is a special golden Pikachu to commemorate the 25th anniversary of Moncolle.
* The size is MS series (about 3-4 cm).

Item Size: 18x16x7

Weight: 60g

- [Gengar] appears in Moncolle!
- Moncolle is a series of high quality figures that fully reproduce the appearance of Pokemon.
- From the top of the head, back, side, and soles, it is faithfully reproduced, so if you pick it up, you may notice a new secret of [Gengar]!
- The size is about 3-4cm.

- Item Size:10x15x5

-Weight: 45g

- Moncolle is a series of high-quality figures that fully reproduce the appearance of Pokemon.

- From the top of the head to the back, side, and all the way to the soles of the feet, Inkay has been faithfully reproduced in detail.

- Designed by Takara Tomy in Japan

- Item Size:10x15x5

-Weight: 45g

- [Miu] appears in Moncolle!
- Moncolle is a series of high quality figures that fully reproduce the appearance of Pokemon.
- Since it is faithfully reproduced from the top of the head to the back, side, and soles of the foot, if you pick it up, you may notice a new secret of [Miu]!
- Size is MS size (3-4cm).

- Contents of the product:

- Body x1

- Pedestal x1

There are road parts, railroad crossings, overpasses, and intersections in Tomica Town where you can enjoy community development.
- You can play in combination with Tomica Town and Plarail.
- You can pass the Plarail rail over the railroad crossing.
- Under the overpass, you can pass the Tomica Town road and Plarail rails.
- The railroad crossing and overpass are assembled, no labeling is required, and you can play as soon as you open the main body.
- When not playing, it can be folded and stored compactly.

* Tomica, Plarail, and rails are sold separately.

Content:

- Railroad crossing x1

- barrier x2

- overpass x1

- intersection x1

- traffic light x4

- curved road x6

- 1/4 road x2

- Item Size: 29x22x5

- Weight: 655g

- This set is recommended for getting started with Tomica Town, which contains basic parts.
- You can make various layouts with the road parts of the set.
- The scene parts include traffic lights, bus stops, and tunnels.
- You can make a big town by combining it with Tomica Town products sold separately.

* Tomica is sold separately.

Content:

- T-shaped road x2

- 1/2 road x2

- 1/4 road x2

- curved road x4

- pedestrian crossing x1

- traffic light x2

- bus stop road x1

- Bus stop sign x2

- Tunnel x1

- Item Size: 25x15x8

- Weight: 400g

- It is a set of [Bus stop] and [Tomica town bus (seaside line specification)] that connect to the road of Tomica town.
- No need to assemble and label, you can play as soon as you open the main body.
- When you don't play, you can fold it and store it compactly.

* Tomica other than Tomica Town Bus is sold separately.

Content:

- Bus stop x1

- Mitsubishi Fuso Aero Start Mika Town Bus x1

- Item Size: 12x11x11

- Weight: 170g

Disclaimer: The packaging condition may vary individually.  Kindly please contact us to confirm the packaging condition before placing order, thank you. 

Brand: Tomica 

Manufacturer: Takara Tomy

Series: Tomica 

Release Date: Mid May., 2022

Material: Diecast

Item size:  10 x 6 x 6 cm

Item weight: 55g

- Random booster containing one of 6 types!
- Rare 1 is [Chain Cerberus.Fr.Yr`-6]! A part of the thick 8-blade is movable to disperse the opponent's attack, and the DB core with a rubber lock with high burst resistance will thoroughly prevent the opponent's attack!
- Rare 2 is [Dryger V2.Ov.Wd`]!
- Beyblade's popular bay is reprinted in burst version!
* A separately sold launcher is required to play with this product (custom bay launcher LR recommended).

- Product details:

- Layer x1

- Disc x1

- Driver x1

- Evolution Gear (included only with 03) x1

- Tool (attached only with 05) x1

- Sticker x1

- Instructions on how to play correctly Book x2

Takara Tomy Pokemon Come On Koduck !

- When you call out to him, Kodak will respond enthusiastically and start walking!

[If you call out to him, Kodak will come back cheerfully!]
- Answer, walk, sing, and forget everything...?
- Kodak will give you a variety of reactions!

- Product Contents: Main unit (1)

- Batteries: 2 x AAA alkaline batteries (sold separately)

- [Nekurozuma (Akatsuki no Tsubasa)] appears in Moncolle!
- You can play with moving wings.
- Moncolle is a series of high quality figures that fully reproduce the appearance of Pokemon.
- Since it is faithfully reproduced from the top of the head to the back, the side, and the sole of the foot, if you pick it up, you may notice a new secret of [Nekurozuma (Akatsuki no Tsubasa)]!
- Size will be ML size (about 10cm).
- Product Description:

- Body x1

- Pedestal x1

- From [Ultraman Trigger NEW GENERATION TIGA], [Metsuorochi] Ultra Soft Vinyl is now available!

- You can play with [Ultra Hero Series], [Swirl Transformation DX Nurse Dessey], and [DX Guts Falcon] (all sold separately).

Item Size: 23 x 12 x 8 cm

Weight :85g

- Ultra soft vinyl from [Ultraman Regloss] is now available in the Ultra Hero series!

- We will commercialize a new hero wrapped in a mystery at the fastest speed.
- You can play with [Ultra Monster Series] (sold separately) and [DX Guts Falcon] (sold separately).

Item Size: 14.5 x 6.5 x 3 cm

Weight :40g

- With new equipment that can also be used for [METAL BUILD Evangelion Unit 1] and [METAL BUILD Evangelion Unit 2], the long-awaited [METAL BUILD Evangelion Unit 0] finally unveils.

- The long-awaited No. 0 machine has appeared in the METAL BUILD Evangelion series, a giant with steel muscles. In addition to the [portable battery] and [recoilless rifle] newly set by designer Ikuto Yamashita, [replacement shoulder parts] that can reproduce the state with the shoulder pylon removed are for 3 units of 0th machine / 1st machine / 2nd machine. Included. The new development of METAL BUILD Evangelion, which will be reborn into a new form, has started.

- METAL BUILD [Evangelion Unit 0] is finally here in the Evangelion series.
- No. 0 / No. 0 (revised) can be replaced by replacing the shoulder parts.
- Progressive knives can be stored in the scabbard.
- Reproduce the new design of Unit 0 created by Mr. Ikuto Yamashita with precise coloring technique.
- Comes with two recoilless rifles on the left and right.
- METAL BUILD Original armed battle visor is included.
- Comes with a portable battery. Battery packs can be joined to various parts of the body.
- A pallet rifle is included.
- Comes with replacement shoulder parts that can be attached to the separately sold [METAL BUILD Evangelion Unit 1 / Unit 2]. You can enjoy an unprecedented novel silhouette.
- METAL BUILD Evangelion series restarts with unprecedented play value!

[set content]
* Main body
* Replacement wrist left and right 4 types each
* Palette rifle
* Magazine for pallet rifle
* Thigh pylon
* Progressive knife
* Progressive knife sheath
* Battery for carrying left and right x 2
* Battery holder for carrying
* Battery joint set
* Recoilless rifle left and right
* Left and right shoulder parts for reproducing Unit 0
* Battle visor
* A set of joints
* A set of umbilical cables
* A set of dedicated pedestals
* Support
* Replacement shoulder parts for the first machine left and right
* Replacement shoulder parts for Unit 2 left and right

Disclaimer:  The packaging condition may vary individually.  Kindly please contact us to confirm the packaging condition before placing order, thank you.

Brand: Tomica 

Manufacturer:  Takara Tomy

Scale: 1/62

Series: Tomica

Release Date: Mid Jun.,2022

Item size:  7.8 x 4 x 2.8 cm

Item weight: 50g

Pokemon Dynamax Band

Product Description:

1. Includes: 1x Main Body + 1x Meza Tag -Pikachu Dynamax Tag 

2. Red LED: Lighting up with Switch & can be part of the costume for the Pokemon lovers. 

3. Packaging Language: English

4. It ensures the DYNAMAX will be activated and get an advantage in battles and get powerful Pokémon tags! 

5. It’s a  Power-up Tool that can be used with the POKEMON MEZASTAR

--Battery: LR44 button for test x 2 (included)

Disclaimer:  The packaging condition may vary individually.  Kindly please contact us to confirm the packaging condition before placing order, thank you.

Brand: Tomica 

Manufacturer:  Takara Tomy

Scale: 1/62

Series: Tomica

Release Date: Mid Jun.,2022

Item size:  7.8 x 4 x 2.8 cm

Item weight: 50g

Disclaimer:  The packaging condition may vary individually.  Kindly please contact us to confirm the packaging condition before placing order, thank you.

Brand: Tomica 

Manufacturer:  Takara Tomy

Scale: 1/61

Series: Tomica Premium

Release Date: Mid Jul.,2022

Item size:  8 x 4 x 3.8 cm

Item weight: 48g

Disclaimer:  The packaging condition may vary individually.  Kindly please contact us to confirm the packaging condition before placing order, thank you.

Brand: Tomica 

Manufacturer:  Takara Tomy

Scale: 1/61

Series: Tomica Premium

Release Date: Mid Jul.,2022

Item size:  8 x 4 x 3.8 cm

Item weight: 48g

Disclaimer:  The packaging condition may vary individually.  Kindly please contact us to confirm the packaging condition before placing order, thank you.

- Action: Opening and closing the left and right doors, deploying and storing retractable lights

Brand: Tomica 

Manufacturer:  Takara Tomy

Scale: 1/62

Series: Tomica Premium

Release Date: Mid Jun.,2022

Item size:  8 x 4.2 x 3.8 cm

Item weight: 53g

Disclaimer:  The packaging condition may vary individually.  Kindly please contact us to confirm the packaging condition before placing order, thank you.

- Action: Opening and closing the left and right doors, deploying and storing retractable lights

Brand: Tomica 

Manufacturer:  Takara Tomy

Scale: 1/62

Series: Tomica Premium

Release Date: Mid Jun.,2022

Item size:  8 x 4.2 x 3.8 cm

Item weight: 53g

Disclaimer:  The packaging condition may vary individually.  Kindly please contact us to confirm the packaging condition before placing order, thank you. 

- Action: Trailer left and right movable / disconnection
- Product details: Tomica body x1

Brand: Tomica 

Manufacturer: Takara Tomy

Scale: 1/128

Series: Tomica Long Type

Release Date: Mid Jun., 2022

Material: Diecast

Item size:  15.8 x 4.2 x 3.8 cm

Item weight: 104g

Disclaimer:  The packaging condition may vary individually.  Kindly please contact us to confirm the packaging condition before placing order, thank you.

- Action: Suspension / Panel opening / closing

Disclaimer:  The packaging condition may vary individually.  Kindly please contact us to confirm the packaging condition before placing order, thank you. 

- Gimmick: Left and right door opening / closing / suspension

- [Tomica Premium unlimited] is a car that appears in various scenes such as movies, dramas, and comics, and its attractive activity is vividly remembered. It is Tomica reproduced in.
- This is the [Tomica that makes adults hot] series with the potential of ? (Mugen) that not only adults who used to play with Tomica but also fans of the work can enjoy it in their hands.

Brand: Tomica 

Manufacturer: Takara Tomy

Series: Tomica Premium Unlimited

Release Date: Mid Jun., 2022

Material: Diecast

Item size:  22.3 x 14.4 x 5 cm

Item weight: 107g